Brands
Solar (Structure, GI, TMT) dealer in Saharsa, Supaul & Madhepura
Solar is the angle, patti, square, round and shutter section we sell the most of for grill and gate work in Saharsa. It comes from the Alaknanda TMT group's mill, in black and in galvanised, and we have stocked it for years with no complaints coming back.
- 7 products
- 3 categories
- Own delivery, 34 blocks
- Open all 7 days
Ask a fabricator in Saharsa what he cuts a window grill or a gate frame from and Solar angle is the usual answer. The finish is clean, the lengths run straight, and the section is even from one end to the other, which is what a welder wants when he is squaring a frame. Jay Shree Infra keeps it on Meera Talkies Road and sends it out to Saharsa, Supaul and Madhepura on our own vehicles.
The same name goes on Solar TMT sariya, rolled at the same mill. The fabrication sections are laid out on the structural steel page and the shutter sections on the rolling shutter page. Below is what we keep under the Solar name and how to order it.
What we keep
Solar sections in black and GI, and Solar TMT
Six fabrication and shutter sections, each in MS black and in galvanised, and sariya. Angle to shutter profile, what is cut and ready shifts through the week, so a call before the vehicle leaves saves a second trip.
- AngleThe L section a window grill, a gate frame and a shed brace are cut from. Our first pick for grill and gate work; say the leg, the thickness and black or GI.
- Flat (Patti)Patti for gates, grills, brackets, clamps and reinforcement strips. Give the width and the thickness together, because a patti is bought on the pair.
- Square Bar / Square SectionSquare for grill filling, railings and decorative work. Say whether the job wants solid bar or hollow section, and the size, and we tell you what is in.
- MS Round BarRound for gate bars, railings, shafts and machinery work. It sells by the kilo, by the piece and by the tonne, so name the diameter and how you are counting.
- Shutter Profile (Shutter Patti)Shutter patti in plain, barfi, round and flat, cut to the width of the opening. Bring the clear width and we cut the length to it.
- Shutter Guide (Guide Channel)The side channel a shutter runs in, cut to the height of the opening. Order it with the profile so the two match.
- TMT Bar (Sariya)Solar TMT sariya for slab, column and beam work. Name the diameter and the grade on the call, and check the ISI mark on the bundle tag when the load arrives.
Solar structural is the six angle, patti, square, round and shutter sections; Solar TMT is the sariya. Both come off the same mill and go out under the one Solar name. Structure and GI are two finishes of the same section: black for painted grill and gate work, galvanised where the piece will stand out in the rain. There is no Solar pipe, chadra or cement; for those, ask us by product and we name the brands standing.
Why we recommend it
Good finish, straight lengths, and no complaints coming back
We have sold Solar for years and it is what the fabricators around here take for grill and gate work. The finish is clean, the section is even, it welds cleanly, and the galvanised coat holds. When a house builder asks which angle to put on the windows, this is the one we point to first.
Solar TMT sariya stands on the rack beside SAIL and our other sariya brands. If the drawing or the engineer names a make, say so on the call and we load that one.
Same sizes under HMB
HMB in the same sizes
The same six sections also stand under HMB, and the HMB page carries its published weight per metre and length against each size. If a job asks for one name over the other, say which; if not, we load whichever has the size standing that day.
How to order
Section, size, finish, length, quantity
Tell us the section (angle, patti, square, round, shutter patti or guide), the size and thickness, black or GI, the length, and how many pieces or how many kilos. For a shutter, the clear width and height of the opening are enough; we work out the rest. Our own vehicles carry it, tempo up to truck, across all 34 blocks of Saharsa, Supaul and Madhepura. If the site is down a narrow lane, say so and we cut before loading. Sariya diameters, weights and grades are on the TMT Bar (Sariya) page and the sariya weight chart.
Questions
Solar par jo poocha jata hai
Solar angle aur sariya kaun banata hai?
Solar comes from the Alaknanda TMT group's mill. The group does not advertise the Solar name, so you will not find a catalogue for it, but the angle, patti, square, round, shutter sections and Solar TMT sariya are all rolled there. We buy it in and bill it in our own name from Saharsa.
Solar me angle aur patti ki size list mil sakti hai?
Yes, on the phone. Say the leg or the width, the thickness, the length, and black or galvanised, and we tell you what stands under the Solar name today. Not every size is in every brand on a given day, so a two minute call before you send the tempo saves a second trip.
Shutter ki patti Solar me kaun kaun se design me aati hai?
Plain, barfi, round and flat. Length is cut to the shutter, so the clear width of the opening is the first number to give us; the height sets the guide channel. Order the profile and the guide together and the pair goes out matched.
Grill aur gate ke liye Solar theek rahega ya kuch aur lein?
Solar is what we recommend for grill and gate work; it is the section fabricators here take most, it welds cleanly and the finish paints well. For a piece standing in the open, take the GI finish. If the drawing names another make, tell us and we quote that instead.
Solar ka section gaon tak kaise bhijwate hain?
On our own vehicles, tempo up to truck, across the 34 blocks of Saharsa, Supaul and Madhepura, with carriage at the market rate. Say whether the pieces can be cut here before loading, since a full length turns down a narrow lane long before weight matters.
Contact
Say the section and the size, we say what is standing
Angle for a grill, patti for a gate, shutter patti for a shop front, or sariya for the slab: name it, say black or GI, and we tell you the size in stock, the rate today and when the vehicle can leave.
Shop hours: All 7 days, 9:30 AM to 6:00 PM