Guides
Ordering by phone: how it works with us
Ring +91 6202 967 218 with the right numbers ready and the call moves straight to stock and rate, and the numbers are not the same for every product on this floor.
- Guides
- 1 table of figures
- Own delivery, 34 blocks
- Open all 7 days
Jay Shree Infra takes an order over +91 6202 967 218 for sariya, angle, chadra, cement and rolling shutter sections alike, and what settles the rate is a different question each time. A sariya order needs its diameter and its grade before a kilo can be priced; a shutter order needs nothing at all except the clear width and height of the opening. Bring the right pair or trio of numbers to the call and stock and today's rate come back before the vehicle is even mentioned; bring the wrong ones and the same call runs twice.
A brand name helps and is never what starts the call. Sariya and cement both sell under several names on our own floor, from Tata Tiscon and SAIL to the Solar and HMB lines that come off the Alaknanda group's own mill, and the diameter or the bag count still decides the rate ahead of the name on it. Say the brand where one is already settled; where it is not, the size on its own gets stock and rate moving.
The checklist
What each product needs before it can be quoted
The five product families this counter sells most, and what each one asks for before stock and rate can be read out over the phone.
Scroll the table sideways to see every column
| Product | What we call it here | Have this ready |
|---|---|---|
| Sariya (TMT bar) | Sariya | Diameter, grade, and kilos or bundles |
| Angle | Angle patti | Leg size, thickness, finish (MS black or GI), and length |
| Chadra (roofing sheet) | Chadra | Profile, thickness, length, and colour on the painted line |
| Cement | Cement | Brand, type or grade, and how many bags |
| Shutter section | Shutter | Clear width and clear height of the opening |
This is what the counter actually asks back on a call, not a fixed script, so give the number and the rest of the sentence looks after itself. A brand is welcome anywhere on the list and never required to start it, because the size decides the rate ahead of the name.
Sariya is the one row that cuts both ways. Diameter and grade decide the rate, and after that a bundle counted in kilos and the same steel counted in pieces are priced two different ways, so say which one you are buying by rather than only how much.
A shutter order carries the shortest list of the five and the one pair of numbers that everything else waits on: the clear width sets the length of the lath and the clear height sets the guide channel, and the spring, the shaft and the lock all follow once the workshop has that pair.
Sariya aur angle
The two steel numbers that decide the rate
Sariya on our Saharsa floor runs 5.5 mm to 32 mm across five main grades, Fe 500 up to Fe 600 and a project grade besides, and the diameter with the grade is what a kilo gets priced against first. A named brand, Tata Tiscon, SAIL, Solar, Kamdhenu or one of the others on the rack, narrows the call further, but it is not what starts it.
Angle asks for four numbers rather than two: the leg size, the thickness, the length, and whether it is MS black or galvanised GI. The finish is not a detail to add on later, because Solar's black angle and HMB's Grill Guard GI line sit on two different racks, and the workshop's own welding plan usually settles between them before the call is made.
Chadra aur shutter
One naap on the sheet, two on the shutter
Chadra, tina or colour, is quoted on profile, thickness, length and, on the colour side, the shade: tina runs 0.30 and 0.45 mm in a corrugated profile, colour runs 0.35 to 0.47 mm in the maker's own rib, and both stand in 6 to 22 ft lengths with anything longer cut to measure. Ask whether a thickness figure is the bare steel or the painted total before two quotes go side by side, because the same three digits can mean two different sheets.
A shutter order skips a materials list altogether. The clear width of the opening sets the length of every lath, the clear height sets the guide channel and runs down both sides of the frame, and the design, plain, barfi, round or flat, comes third. Everything past that, the spring, the shaft, the lock, is the workshop's own drawing, and it rides on the same vehicle if it is said on the same call.
Cement
Brand, bag and count, in that order
Cement is quoted on the brand, the type or SKU, OPC 43, OPC 53 or PPC among them, and the number of bags. Jay Shree Infra keeps UltraTech, ACC, Nuvoco, Shree and more on the Saharsa floor, and not every grade sits in every brand on a given day, so the brand and the bag both matter to the answer you get back.
Where a bori has to stand for a while before the work starts, that is a different question from the order itself, and the cement in the monsoon guide answers it size for size.
After the numbers
What happens once the call has them
Stock and today's rate come back on the same call, read off what is actually standing in the godown rather than off a list, because a size can run short between two mornings. Which of the tempo, tractor or truck carries the load is settled in the same conversation, against the weight and the road, the way the how to order page sets out in full.
An MTC travels with a load only where it is asked for, and mostly that is tender and project work naming an approved make. Say it on the call rather than after the vehicle is loaded, because the paper has to be pulled at that point, not once the steel has already left.
Not every size is in every brand on a given day, on any of the five. The table above is what to bring to the call, and stock is what the call itself is for.
Sources
What the MTC and the approved make rest on
Two documents behind the two words tender and project buyers ask this call for.
Questions
Phone se order karne ke sawal
Sariya ke liye sabse pehle kaun sa number bolna hai?
The diameter and the grade, before the brand and before the quantity. Fe 500 up to Fe 600 sit on the rack here, 5.5 mm to 32 mm, and the rate is read against those two numbers first. Say whether you are buying by the kilo, the bundle or the piece too, because sariya sells both ways and which one applies depends on the grade and how that brand is moving that day.
Angle mangwate waqt MS aur GI kaise decide karein?
By the job the angle is going into and by what the workshop is already set up to finish. MS black leaves the godown bare and gets painted or powder coated after welding; GI arrives galvanised and needs nothing more. Say the leg size, the thickness and the length along with the finish, because Solar's black and HMB's Grill Guard sit on two different racks.
Chadra order me colour batana zaroori hai kya?
Only on the painted line; tina chadra carries no shade to name. Give the profile, thickness and length either way, and on colour add the shade and say whether your quoted thickness is bare steel or the painted total, because the same figure can describe two different sheets.
Shutter ke liye size kaise batayein?
Two numbers, the clear width and the clear height of the opening, and that is enough to start. The width sets the lath, the height sets the guide channel, and the design, plain, barfi, round or flat, is the third thing the call settles.
MTC chahiye to alag se bolna padta hai?
Yes. An MTC travels with a load where the call asks for it, mostly on tender and project work naming an approved make. Say it before the vehicle is loaded, because the paper has to be pulled at that point, not after the steel has left.
Rate order ke baad milta hai ya call par hi?
On the same call. Once the numbers above are in front of us, we read out what is standing against them and the rate for that day straight from the counter, and the vehicle gets settled in the same conversation.
Before you dial
The list we read back to you
Each one narrows what the counter asks for next.
Which of the five are you calling about, sariya, angle, chadra, cement or a shutter section?
The list of numbers changes with the answer, so it is worth saying first.
What is the diameter, leg size, profile or bag type?
This is the number the rate is actually quoted against, ahead of any brand name.
How much, and in which unit?
Kilos or bundles for sariya, length or pieces for angle, sheet count for chadra, bags for cement. Say the unit with the count.
Is there a brand or make already settled?
Say it if there is one. If there is not, the size on its own is enough to start, and we say what is on the floor.
Is this tender or project work?
Say so and we ask whether an approved make and an MTC have to travel with the load.
Contact
Say the numbers, not only the name
Five products on this floor, and each is quoted off its own pair or trio of numbers. Ring +91 6202 967 218 with the size, the grade or the clear opening in hand, and stock, the rate and the vehicle are settled in one conversation, MTC included where the job asks for it.
Shop hours: All 7 days, 9:30 AM to 6:00 PM