Jay Shree Infra

Colour chadra, side by side

Tata Durashine vs Jindal colour-coated sheets

Both are pre-painted colour coated roofing sheet and both stand on this rack, so the profile and the colour you pick decide more of the roof than the brand does; what separates them is how much each maker publishes about its own sheet and how deep our stock runs in each.

  • Comparisons
  • 11 comparisons
  • 2 brands stocked
  • Own delivery, 34 blocks
  • Open all 7 days

Tata Durashine comes from Tata Steel Colors Private Limited, the company that grew out of the Tata BlueScope name, and reaches this godown as the Durashine Roof and Wall range. Jindal colour-coated sheet comes from Jindal India, the coated steel maker of the B.C. Jindal Group, working since 1952 out of two mills in Howrah district. Both are pre-painted profiled steel for shed, godown and house roofing across Saharsa, Supaul and Madhepura, and Tata is the name this rack sells the most sheet under.

Someone reading this has usually already leaned one way: toward the sheet with a full published number sheet behind it, or toward the one picked mainly by colour and profile in front of him. What follows puts both makers' own figures into one table, spells out the job each sheet is actually bought for, and closes on the name we would send home with you.

Both sheets on paper

Durashine and Jindal, column for column

Tata Durashine and Jindal colour-coated sheet on the six things a buyer can check before he picks up the phone.

Scroll the table sideways to see every column

What to compareTata DurashineJindal colour-coated
MakerTata Steel Colors Private LimitedJindal India (B.C. Jindal Group)
Lines publishedDurashine Roof & WallNeucolor+, Sabrang, Rangeen
CoatingPre-painted metallic-coated steelColour-coated steel
Thickness published0.37 to 0.62 mmNot published nationally
Roof cover width1015 mm effective coverNot published nationally
Length publishedUp to 16 ft, 24 ft in CoolShieldNot published nationally

Every cell comes from the maker's own page, linked below. Jindal India does not publish a thickness, width or length figure against its colour steel the way Tata Steel Colors does; that gap is the limit of what Jindal has chosen to print nationally, not a fault in the sheet. Which of the two is actually up on the rack this morning is a question for the phone, answered on the call rather than in writing.

Three rows in that table print a Jindal figure and three do not, and the reason is the same both times: Tata Steel Colors puts a full dimension table on its own roofing page, cover width, painted thickness and length together, and Jindal India's coated steel page names its lines and its colours without setting out a national size range against them. A gap on the Jindal side is not a mark against the steel; it is a maker choosing not to publish a number, and this shop's own stock is a separate fact from what either maker prints.

The coating row reads close on both sides because the category is the same: a base of galvanised or aluminium zinc coated steel with a paint system baked onto it. What differs is which of Jindal's five published lines a given coil belongs to, Neucolor+, Sabrang or Rangeen among the painted ones, and that is read off the coil marking rather than guessed from the word Jindal alone.

The Tata side

What the Durashine sheet gives you

Durashine is the sheet this rack moves the most of, and Tata is the name that leads the whole sheet category at this godown, ahead of SAIL and Bokaro on the other sheet lines. A shed builder who wants a documented sheet, a published thickness, a published cover width and a brand mark rolled into the steel itself, reading Durashine Tata Steel Colors along the sheet, gets all four from this one line. We also carry CoolShield, the insulated version, and the crimped sheet for a curved roof, so a Durashine order can grow beyond plain roofing without changing brands.

The second place it earns its keep is on a tender or an approved make list. Tata is a name that turns up on those lists in this belt more often than most colour steel brands, and where a job asks for a mill certificate to travel with the load, that is arranged with the delivery rather than chased after it lands.

The Jindal side

What Jindal's coated lines cover

Jindal is an honest colour-coated sheet and we have stocked it for years with no complaints coming back on the finish. Where a shed or a godown roof needs plain colour sheet in a standard shade and a standard length, without a buyer wanting to compare a brochure of numbers first, Jindal does the job the way any established sheet mill's coil does. We keep it in 0.35, 0.45 and 0.47 mm, and lengths run from 6 ft to 22 ft with custom cutting past that.

Colour matching is where Jindal's own paperwork actually helps: its printed colour list carries an RAL number against most shades, Sky Blue as RAL 5012, Pencil Grey as 7015 and so on. A buyer trying to match an existing roof does better bringing that number, or a cut piece off the old sheet, than trying to name a shade by eye.

Our take

What goes on your roof from here

For a shed, godown or house roof where the buyer wants the documented sheet, the published dimensions and the name most likely to sit on an approved list, we reach for Durashine first. It is the sheet we sell the most of on this rack, and a roof bought on Durashine's own published cover width and thickness table is a roof whose numbers can be checked against the maker's own page before the sheet goes up.

We would put Jindal on your vehicle where the job is plain colour roofing on a standard shade, the tender or the drawing has not named a brand, or the buyer already has a Jindal roof up and is matching a colour to it by RAL number. Both sheets are on this rack today; the length, the thickness and the colour decide the order more than the name printed along the steel.

Questions

Roof sheet questions this counter gets

Tata Durashine aur Jindal chadra me kaun sa accha hai?

Both are honest colour-coated sheet and neither is a wrong buy for ordinary shed or house roofing. We reach for Durashine first because it is the sheet we sell the most of and it carries a full published dimension table you can check before the sheet goes up. Where the job is plain roofing on a standard shade, Jindal does it just as well.

Dono chadra ki motai barabar hoti hai?

Not identical on paper. Durashine's own page publishes four painted thicknesses, 0.37, 0.47, 0.52 and 0.62 mm, and we keep Jindal in 0.35, 0.45 and 0.47 mm. Confirm whether a quoted figure is the bare steel or the total painted thickness before comparing two sheets, because the two numbers read differently for the same sack.

Purani chhat se rang match karna ho to konsa brand behtar hai?

Jindal's own colour list carries an RAL number against most shades, which makes matching an existing roof easier: bring the number off the old bill or a cut piece of the sheet. Durashine also publishes a fixed shade card; either works if you bring a reference, and we will check the number against what is standing before you commit to a brand.

Durashine ke roof sheet aur Jindal ke chadra ki max length me kitna farak hai?

Durashine's plain roof sheet is published to 16 ft and its insulated CoolShield to 24 ft. Jindal at this counter runs 6 ft to 22 ft, with custom cutting past that on request. Give us the roof's own measurement and we will say which length, in which brand, is standing today.

Order se pehle pata kaise chalega ki kaun si chadra khadi hai?

Both sheets sit on this roofing rack, though not every thickness of each is cut and ready on a given day. Call +91 6202 967 218 and give the thickness, the length and the shade; the counter will say on the spot which one is actually up before you settle on a brand.

Contact

Say the thickness and the shade, we will say what is on the rack

Tell us the thickness the roof needs, the length and the shade, and the counter will say which of the two is ready to load and which one we would put up there ourselves.

Shop hours: All 7 days, 9:30 AM to 6:00 PM

Call Us Today+91 6202 967 218WhatsApp